1) grabbed one hand, electric unicycle upright on the ground, and two foot pedals.
2) short press the power key to electric unicycle power on, green light is lit.
3) if it is found that the red light is lit, do not attempt to ride.
4) recommended in the wheel forward backward direction PULL HANDLE back and forth a few times, felt wheel speed.
Step two: try to stand
1) will be a preferred foot standing on the pedals to the appropriate, attention should stand on the pedal position will shift their focus to the whole body on the feet.
2) stands the body, standing on the foot pedals that control the electric unicycle balance before and after, and calf close case soft.
3) will gradually shift to more emphasis on electric wheelbarrow on the foot, process, requested the leg, foot and motorized unicycle can form a stable triangular support, or else it will be difficult to shift the center of gravity on a motorized unicycle. Could not be successfully transferred to the center of gravity on an electric unicycle that foot, one foot off the ground before the 1-2 seconds, it is strongly recommended not to ride next.
The third step: move on
1) junior forward: like riding a bike, most of the focus on an electric unicycle, and lightly step on the foot pedal and foot pedal back gently on the ground, walking electric wheelbarrow will move forward. Just like in the previous step to keep standing on one foot electric unicycle action, need to be riding in the process, to regain my balance, and that foot on the ground needs to be fast and light on another pedal. This step requires at least can ride, 3-5 meters of distance.
2) intermediate move on: come this far has been basically normal electric unicycle. This step needs to pay attention to two points: to maintain a certain speed, control the speed by leaning backwards. Recommends that the accumulated experience in the cycling process, practice, more confidence can be maintained after riding long distances and then proceed to the next step.