Winter In The Electric Rover Board At The Beginning Of The Start

- Sep 04, 2017 -

Winter in the Electric Rover Board at the beginning of the start
Electric Rover Board can be seen everywhere in our lives, and now the weather is getting warmer, and choose to ride Electric Rover Board are more and more people, today we Electric Rover Board manufacturers to give you universal awareness of the fire safety of Electric Rover Board.
1. To always check the Electric Rover Board circuit plugs, to prevent contact with the contact caused by ignition, heat; to avoid the aging of the line, wear and cause short circuit, the occurrence of string accidents.
2. Electric Rover Board in the course of normal use, failure to choose a professional maintenance agencies or personnel, do not unauthorized removal of electrical protection devices to ensure that electrical circuits and protective devices in good condition.
3. Electric Rover Board battery will run out of the combustible gas, so the charge must not be in a narrow, sealed environment, should be carried out in the outdoors, or remove the battery alone charge.
4. When charging to select the appropriate line, line laying should be fixed installation, to install short circuit and leakage protection device.
5. Electric Rover Board charging must be away from flammable items, can not charge too long, charging time is too long, the charger overheating easily lead to fire, charging should be in accordance with the provisions of the instructions to charge, charging time in principle not more than 10 Hours.
6. In the process of starting the Electric Rover Board, climbing should pedal help to prevent the starting current is too large, the machine for a long time overload, causing the motor coil, lines, batteries and governor overheating damage, and even brewed Into a disaster. To try to avoid in the rain, the water section of the road to prevent the motor into the water, charging short-circuit fire.
As long as we rational use of Electric Rover Board is not a fire like this kind of thing, mainly to remind you to use Electric Rover Board, charging time can put safety first.
Since the second half of the strongest cold air will affect most areas. This day and two days, and accompanied by strong winds, the temperature drop 6 ℃ to 12 ℃, the cooling strength. So today feel the feeling of winter coming soon. Today, Electric Rover Board manufacturers just talk about how to maintain the Electric Rover Board in winter.
When the temperature is too low, we should try to shorten the use of Electric Rover Board time, and timely charging. Therefore, the winter ride Electric Rover Board should not let the battery in the long-term lack of electricity in the state, be sure to develop a day regardless of the number of trips, the evening should be a good habit of charging in time. At the same time, the battery is best not to idle for a long time, Electric Rover Boards such as winter do not, the best every month to give the battery charge a power to ensure that the lead-acid battery storage capacity, while avoiding acid spill damage to the battery.
Winter in the Electric Rover Board at the beginning of the start, be sure to use foot power, do not "zero start" to avoid a lot of current discharge, or a great damage to the battery. Electric vehicle driving process to ensure the safety of the premise, should minimize the number of brakes to avoid frequent start, so as not to affect the battery life.
When we Electric Rover Board when no electricity will think of charging, in fact, we do not really understand the Electric Rover Board charging, the following by our Linyi Electric Rover Board manufacturers to tell you about the three common Electric Rover Board charging method.
1. Constant current charging, is the process of charging the current is constant. If it is more than a battery in series, the general choice of this way the charging method, the current in the charging process is very small, so the charging time is longer, our family is generally used in this way.
2. Fast charge, this charging method allows the Electric Rover Board to quickly complete the charge. In a short time, this way can be sent to the battery within a large current pulse, the entire charging process is actually the battery in the repeated charge and discharge, this way can make the Electric Rover Board charging quickly completed, but because of this way the charging current And the voltage is not fixed, so the battery has a certain impact.
3. Constant voltage charging, refers to the charging process, the voltage to maintain a constant amount. At the beginning of the charge, the battery resistance is very small, the charging current is very large, and after charging for some time, the battery internal resistance increases, charging the charging current becomes smaller, this charging is relatively fast way.

Previous:Electric Scooter Turn To Judge Good Or Bad Next:How To Make Electric Scooter Batteries More Durable In Winter